manualshive.com logo in svg

Takahashi e-130D, Instruction Manual

Share
Download
Takahashi e-130D Instruction Manual Download Page 3

- 3 - 

 

CONTENTS 

Warning & Caution ------------------ 2   

Specifications--------------------------3   

Tube Assembly Layout --------------4   

What is the  ε-130D? ----------------5   

Attaching Finder Tube Holder ----6 

Focusing System----------------------8 

Finder Alignment--------------------11 

Observation---------------------------13 

Photographic Accessories---------16   

Optical Alignment-------------------17   

Care and Maintenance------------- 25   

System Chart--------------------------26 

 

SPECIFICATIONS 

Optical System                                                  Hyperboloidal Catadioptric   

Effective Aperture 

 

 

130 mm   

Effective Focal Length                                    430 mm   

Effective Focal Ratio                                        1:3.3 

Secondary Mirror Diameter   

 

  63 mm   

Corrector lens                                                    2-element   

Image Circle                                                      φ44 mm   

Photographic Field 

 

 

  5.9 degrees 

Metal Back                                                          56 mm   

Diameter of Main Tube                                    166mm   

Length of Main Tube Ass’y                          460 mm   

Weight of Main Tube Ass’y                          4.9 kg (10.8 lbs.) 

Focusing System                                              Rack & Pinion

 <

correspondence with MEF-3>   

Standard Accessory                                          This Instruction Manual 

 

 

 

 

 

  WARRANTY SYSTEM AND WARRANTY 

                                                                              Allen Wrench (2, 2.5, 3, 4 mm) 

Three Small Screws (for Attaching and 

Detaching Primary Mirror) 

 

 

 

 

Summary of Contents for e-130D





























Reviews:

No comments

Brands by name

Popular brands

Load more brands