13
Components and Their Functions
■ Main Unit Components (Microscope unit (Manual)・Top lens)
● The illustrations below show components of the main unit.
No. Component Name
Function
14 Mount
To fix the shaft of the XY or universal coupling
15 Suspension arm
To support the microscope unit
16 Power connector for microscope unit
To supply power to the microscope unit for focusing
17 Operation handle(Tilting handle)
To tilt forward and back the microscope unit by loosening it
18 Filter plate
To use the blue-cut, retinal protection, or only permanent UV and
heat absorbing filter
19 Red reflex illumination ON/OFF lever
The red reflex illumination is applied when the lever is pushed
The illumination is blocked when the lever is pulled out
20 Objective lens
Can be replaced by other objective lenses with each focal length
22 Set screw
To fix the binocular unit, or optional accessories to be mounted
23 Alignment screw
To align the binocular unit, or optional accessories to be mounted
24 Magnification knob
Changes the microscope magnification in steps when rotated
25 Magnification mark
The value under the mark is the current variable power factor
* The numbers in the table below correspond to the circled numbers in the previous section.
㪈
㪈㪅㪍
㪉㪅
㪌
㪇㪅㪍
㪈
㪇㪅
㪋
OM8-T23
14. Mount
15. Suspension arm
16. Power connector for
microscope unit
17. Operation handle(Tilting handle)
18. Filter plate
19. Red reflex illumination ON/OFF lever
20. Objective lens
22. Set screw
23. Alignment screw
24. Magnification knob
25. Magnification mark
