17
5 .
S E R V I C I N G A N D M A I N T A I N I N G T H E W I N C H
PROBLEM:
POSSIBLE CAUSES:
ACTION:
Not enough pressure in the
hydraulic system
Check if the winch drive is engaged (PTO
shaft must be connected, otherwise the pump
does not function)
Check the oil quantity in the reservoir
System is not powered
Check the electrical connection on the tractor
and check if tractor position lights are lit
(check the remote control battery)
Check and clean the corroded battery
contacts, if necessary
The control valve does not work
Check if the system is powered (see the
solution above)
In case the control valve is only blocked
temporarily, you can unblock it by pushing the
control console buttons and magnet push-
caps simultaneously. The push-caps are
located in the middle of the magnet surfaces
The winch does not
react to controls
when you push the
button on the control
console
(or by pushing the
buttons on the
remote control, when
controlling the winch
remotely)
9
Regular and proper maintenance is necessary for trouble free and long-life operation of the
winch.
5.1. TROUBLESHOOTING .
