15-Dec.2017 Ver.1.4
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
5/9
EBSGJN, EKSGJN
EBAGJN, EKAGJN
How to use
It is very easy just to tie this board to the PC with a USB cable. It is not necessary to
change the setting of the board. The power supply of the module supplies by default
3.3V from 3V3OUT of FT232RQ.
For software development
Nordic-DK and Use case
Nordic-DK
http://www.nordicsemi.com/eng/Products/nRF51-DK
miniUSB
SWD
EBSGJN Series
EBAGJN Series
SWD : Serial Wire Debug
For example, please use J-Link Lite
CortexM-9 JTAG/SWD Emulator.
EKSGJNZWY and EKAGJNZXX included
CN1 supports the connection of the 10 pin
1.27 mm flat cable.
Nordic-nRF51DK
Nordic
Master control panel
etc.
nRF51-Dongle
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
