background image

P4BEA User’s Manual 

 

 

1.2 

Features 

• 

Wake up on LAN. 

• 

Wake on Keyboard. 

• 

Modem Remote Ring On. 

• 

Support NCR SCSI BIOS. 

• 

Support Suspend to RAM. 

• 

Support Ultra DMA 33/66/100. 

• 

Support Hardware Monitor function. 

• 

Realtek ALC201A Audio CODEC on board. 

• 

Intel PRO/100+ Fast Ethernet Interface on board 

• 

Support FSB frequency 400/533MHz. 

• 

Allows CPU settings and easy over clocking of frequency. 

• 

Support Advanced Configuration Power Interface (ACPI). 

• 

Support Desktop Management Interface (DMI) through BIOS. 

• 

Low -power sleep modes, and 2Mbits “Plug & Play” Flash ROM. 

• 

RTC Wake up Alarm: Program the date/time to wake up your system. 

• 

Support AGP 2.0 slot for external AGP 4X Fast Write protocol graphics card 
upgrade. Note :( AGP 1.5V connector only, No support for 3.3V or Universal AGP 
connectors). 

• 

Both the BIOS and hardware levels of the motherboard meet PC '99 compliant. 

• 

USB 2.0 interface with up to 480 Mbps of data transfer rate 

1.3 

Specifications 

CPU :

 

• 

Support Socket 478 for Intel FC-PGA2 Pentium 4 processor. 

• 

Support Intel FC-PGA2 Pentium 4 

Northwood / Willamette

 CPU at 400/533MHz FSB. 

• 

Support Intel FC-PGA2 Celeron CPU at 400 MHz FSB

 

Chipset

• 

Intel FW82C845E (MCH) and FW82801DB (ICH4)  

Summary of Contents for P4BEA





























Reviews: