Tait TP9500 User Manual Download Page 31

Page: 31 / 126

Viewing the function key settings

Use the Main menu to check the features assigned to your radio’s function keys:

1. Press

Menu

and select

Radio settings

Radio info

Key settings

2. In the

Key Settings

menu, scroll through the list of function keys.

3. Press

Select

to view details of the function associated with a particular function key.

4. Press

Back

to return to the

Key Settings

menu.

Use the following table to record the function keys programmed for your radio:

Short key press

Long key press

For more information about the function keys that can be programmed on your radio, contact your radio provider.

Navigating the Radio's Menus

Your radio has a number of menus, each containing lists or sub-menus. The menus available depend on the way your
radio is programmed.

On speaker microphone (if fitted)

Tait International Ltd December 2019

Summary of Contents for TP9500































































































































Search results

Summary of Contents for TP9500

Reviews:

Related manuals for TP9500

Brands by name

Popular brands

Tait TP9500, User Manual

Search results

Summary of Contents for TP9500

Reviews:

Related manuals for TP9500

Brands by name

Popular brands