Tait TP9500 User Manual Download Page 101

Page: 101 / 126

12 Customizing Radio Settings

This section describes ways of customizing the radio.

These features are common to radios operating in either trunked or conventional mode.

This section covers:

Adjusting the Display Contrast

Changing the Color Mode

Changing the Volume of all Audible Indicators

Changing the Volume of Keypress Tones

Changing to Quiet Operation

Changing to Silent Operation

Rotating the Display

Turning On Active Noise Cancellation

Turning on Backlighting

Changing the Color Mode

The display colors can be changed to suit the environment. For example, Red/Black is suited for night display while
Color - Dark is ideal for bright environments. The default setting is Color - Light.

To change the color mode:

1. Press

Menu

and select

Radio settings

Display settings

Color mode

2. Scroll to the desired mode and press

Select

The color modes are:

Mode

Description

Color - Dark

Dark background, light text.

Color - Light

Default setting. Light background, dark text. Best suited
for day time display.

Black/White

White background, black text.

White/Black

Black background, white text.

101

Tait International Ltd December 2019

Summary of Contents for TP9500































































































































Search results

Summary of Contents for TP9500

Reviews:

Related manuals for TP9500

Brands by name

Popular brands

Tait TP9500, User Manual

Search results

Summary of Contents for TP9500

Reviews:

Related manuals for TP9500

Brands by name

Popular brands