Tait TP9100, User Manual

Page: 22 / 100

6 Fitting a speaker microphone
B
e
for
e
fir
st use
of your r
a
dio
Fitting a speaker microphone
The speaker microphone is attached to the radio via a
connector.
Removing the protective cover
Before fitting the speaker microphone, you may need to
remove the radio’s protective cover. This cover is located
above the battery on the rear of the radio.
1 Insert a coin, or other suitably shaped object, into
the slot of the protective cover. Twist the coin
clockwise from the locked to unlocked position.
2 Remove the cover and store in a safe place.
Attaching the accessory connector
Once you have removed the protective cover, you can fit
the speaker accessory connector to the back of
the radio.
1 Push and hold the metal clip to release the lever.
2 Rotate the lever clockwise to an upright position.
3 Insert the white locking clip into the matching hole
at the rear of the radio.
4 Rotate the lever counterclockwise until you hear
it click.
5 Check that the accessory connector is firmly locked
into place.
metal clip
lever
insert the white locking
clip into this hole