Tait TP8135 User Manual Download Page 54

Page: 54 / 120

Responding to missed calls

If you have missed an incoming call, it may be stored in the call
queue, so that you can return the call later.
If a call has been missed, the display
shows

QUEUED

CALLS

and

appears

in the display.
Duplicate calls and group calls are not
queued.

Different types of call queuing

Call queuing can operate in one of three ways:

■

Full call queuing: all unanswered calls are queued.

■

Unanswered call queuing: status calls and short data
messages are queued, along with unanswered voice calls.

■

Last call queuing: only the last unanswered call is queued.

The following section assumes that full call queuing is operating.

Accessing a missed call

To access a missed call:

Long press

to enter the call queue.

The first call in the queue is displayed, along with information
about the type of call and its position in the queue.

123

QUEUED

CALLS

M01/03

CAR 2

call type:

= voice call

= emergency call

= short data message (SDM)

= status

caller’s identity

position of call in

the call queue

number of missed calls

Summary of Contents for TP8135

























































































































Search results

Summary of Contents for TP8135

Reviews:

Related manuals for TP8135

Brands by name

Popular brands

Tait TP8135, User Manual

Search results

Summary of Contents for TP8135

Reviews:

Related manuals for TP8135

Brands by name

Popular brands