Tait TP8135 User Manual Download Page 104

Page: 104 / 120

104

Storing batteries

When not in use for a month or more, batteries should be stored
correctly to prolong their life.

■

Remove the battery from the radio before storage.

■

Fully charge the battery if storing for less than one month.

■

Charge the battery to about 30% if storing for longer than one
month.

■

Store the battery in a cool dry place.

Using batteries after storage

Batteries that have been stored for any length of time must be
charged before being used. See

"Charging the battery" on

page 101

Disposing of batteries

Run the battery flat before disposing of it. When disposing of the
battery, be sure to do so in an environmentally sensitive manner.
Please contact your radio provider for information on recycling
programs in your area. See

"Environmental responsibilities" on

page 8

for more information.

Summary of Contents for TP8135

























































































































Search results

Summary of Contents for TP8135

Reviews:

Related manuals for TP8135

Brands by name

Popular brands

Tait TP8135, User Manual

Search results

Summary of Contents for TP8135

Reviews:

Related manuals for TP8135

Brands by name

Popular brands