Tait TP8115 User Manual Download Page 101

Page: 101 / 114

When your radio won’t turn on

If the red LED on the radio does not light up when the radio is
turned on, it is probable that power is not reaching the radio.
Check the following:

■

Is the battery firmly attached to the radio?

■

Is the battery sufficiently charged?

■

Is the battery charger working properly?

If all appears to be in order, but your radio still fails to operate
properly, contact your radio provider for further assistance.

Checking the version of your radio

Your radio provider may ask you for the hardware and firmware
version of your radio, for troubleshooting purposes.
To check the version of your radio:

Long press

to enter menu mode.

Select

ADV

SETTINGS

VERSION

INFO

In the Version Information menu, use and to scroll
through the list of version information available.

The information that may be available is:
— firmware version (

FW VER

)

— hardware version (

HW VER

)

— main database (

MAIN DB

)

— calibration database (

CAL DB

FW VER

01.03.00

Summary of Contents for TP8115



















































































































Search results

Summary of Contents for TP8115

Reviews:

Related manuals for TP8115

Brands by name

Popular brands

Tait TP8115, User Manual

Search results

Summary of Contents for TP8115

Reviews:

Related manuals for TP8115

Brands by name

Popular brands