42
General Safety and Regulatory Information
TB9400/TN9275 Installation and Operation
© Tait International Limited May 2023
All servicing should be carried out only when the PMU is powered through
a mains isolating transformer of sufficient rating.
2.1.3
AC Power Connection
2.1.4
Explosive Environments
Warning
Do not operate the equipment near electrical blasting
caps or in an explosive atmosphere. Operating the equipment in
these environments is a definite safety hazard.
2.1.5
High Temperatures
Take care when handling a PMU or PA which has been operating recently.
Under extreme operating conditions (+140°F [+60°C] ambient air
temperature) or high duty cycles, the external surfaces of the PMU and PA
can reach temperatures of up to +176°F (+80°C).
2.1.6
LED Safety (EN60825-1)
This equipment contains Class 1 LED Products.
English (en)
The PMU must be connected to a grounded mains
socket-outlet.
Norsk (no)
Apparatet må tilkoples jordet stikkontakt.
Suomi (fi)
Laite on liitettävä suojamaadoitus-koskettimilla
varustettuun pistorasiaan.
Svenska (sv)
Apparaten skall anslutas till jordat uttag.
