Tait TM9356, User Manual

Page: 33 / 44

33
Responding to a lone worker prompt
When the lone worker
user activity
timer expires,
the message Loneworker awaiting appears on
the display and you hear a low-pitched beep.
Alternatively, there may not be any visible or
audible indication that the
user activity
timer has
expired.
■
Press any key, turn the volume control, briefly
press the on/off key, or press the PTT key. This
resets the lone worker
user activity
timer.
If you are unable to respond, the
user response
timer begins to count down. You now have less
than two minutes to respond before the radio
automatically sends an emergency call or
enters emergency mode.
■
Press any key, turn the volume control, briefly
press the on/off key, or press the PTT key. This
resets the
user activity
timer.
If you are unable to respond, the radio sends
an emergency call or enters emergency mode.
Pressing a function key to reset the user
activity or user response timer
When a function key is used to reset either the
user activity
or
user response
timer, the programmed
action for the function key is also activated. For
example, if you press the lone worker function key
to reset either timer, then lone worker is turned off.
If the lone worker feature has entered the
"Awaiting" state, keypresses are not actioned.
They only reset the lone worker status back to
counting down.