background image

33

Responding to a lone worker prompt

When the lone worker 

user activity

 timer expires, 

the message 

Loneworker awaiting 

appears on 

the display and you hear a low-pitched beep.
Alternatively, there may not be any visible or 
audible indication that the 

user activity

 timer has 

expired.

Press any key, turn the volume control, briefly 
press the on/off key, or press the PTT key. This 
resets the lone worker 

user activity

 timer.

If you are unable to respond, the 

user response

 

timer begins to count down. You now have less 
than two minutes to respond before the radio 
automatically sends an emergency call or 
enters emergency mode.

Press any key, turn the volume control, briefly 
press the on/off key, or press the PTT key. This 
resets the 

user activity

 timer.

If you are unable to respond, the radio sends 
an emergency call or enters emergency mode.

Pressing a function key to reset the user 

activity or user response timer

When a function key is used to reset either the 

user activity

 or 

user response

 timer, the programmed 

action for the function key is also activated. For 
example, if you press the lone worker function key 
to reset either timer, then lone worker is turned off. 

If the lone worker feature has entered the 
"Awaiting" state, keypresses are not actioned. 
They only reset the lone worker status back to 
counting down.

Summary of Contents for TM9356













































Reviews: