manualshive.com logo in svg

Tait TM8105, User Manual, Page: 7 / 32

Share
Download
Tait TM8105 User Manual Download Page 7

Radio Operation

5

Part 1: Radio Operation

About this Guide ...........................................................................1

Important Safety Information .......................................................................1
Updating this Guide  ....................................................................................1

Safety Warnings  ...........................................................................6

Warning: Safe Operation  .......................................................................6
Warning: High Temperatures  .................................................................6
Warning: FCC RF Exposure Limits  ..........................................................6
Caution: Radio Protection ......................................................................7

Getting Started  .............................................................................8

Radio Controls  ............................................................................................8
Radio Indicators  ........................................................................................10

LED Indicators .....................................................................................10
Audible Indicators  ...............................................................................10

Basic Operation  ...........................................................................11

Turning the Radio On and Off ....................................................................11
Adjusting the Volume ................................................................................11
Selecting a Channel  ..................................................................................11
Making a Call  ...........................................................................................11

Transmit Timer  ....................................................................................12

Receiving a Call  ........................................................................................12
What You Hear on a Channel ....................................................................12

Signalling Mute ...................................................................................12
Squelch ...............................................................................................13

Monitor ....................................................................................................13

Activating Monitor  ..............................................................................13
Activating Squelch Override .................................................................13

Scanning ...................................................................................................14

Activating Scanning  ............................................................................14
Nuisance Delete  ..................................................................................14
Priority Scanning  .................................................................................14

Troubleshooting .........................................................................15

Removing the Radio from the Vehicle  ........................................................15

Notes ............................................................................................16

Summary of Contents for TM8105

































Reviews:

No comments