manualshive.com logo in svg

Tait TM8100 mobiles, Installation Manual

Share
Download
Tait TM8100 mobiles Installation Manual Download Page 6

6

Preface

TM8100/TM8200 Installation Guide

© Tait Limited

 

November 2012

Technical notes are published from time to time to describe applications for 
Tait products, to provide technical details not included in manuals, and to 
offer solutions for any problems that arise.

All available TM8100/TM8200 product documentation is provided on the 
CD supplied with the service kit

1

. Updates may also be published on the 

Tait support website.

Publication Record

1. Technical notes are only available in PDF format from the Tait support 

website. Consult your nearest Tait Dealer.

Issue

Publication Date

Description

01

August 2005

First release

02

July 2006

Auxiliary connector information updated
TM8235 and TM8260 information added

03

March 2008

References to hand-held control head, remote 
installations, and multi-head/multi-body 
installations added.
Product codes for trigger-base bodies added.
Information on antenna gain for 800MHz radios 
added.
Part numbers for fuses corrected.
Instructions on avoiding connection to centre tap 
of two 12V batteries added.
Rating for 24V-to-12V converter added.

04

November 2009

Installation Options section added.
Minor corrections and additions.

05

November 2012

New Tait logo

Summary of Contents for TM8100 mobiles

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands