Tait TD9300, Installation Manual

Page: 21 / 34

DRAFT 3
TD9300 Installation Manual
Connection 21
© Tait Limited March 2015
g Power LED The green power LED is lit when power is connected to the
TD9300.
h
RTU Status LED The green RTU status LED is lit when the RTU is linked to the
TD9300.
i
DMR LED The green DMR LED is lit when the TD9300 is registered on the
DMR network.
j
1 LED Reserved for future use.
1)
2 LED Reserved for future use.
1!
DC input Connect a 9–36VDC power supply to this input using the supplied
connector. The maximum current drawn by the TD9300 is 4.5A at
24VDC when transmitting at 25W. Refer to
“Connecting DC
Power” on page 23 for more information.
1@
Ground M4 chassis ground connector. An M4x12mm screw and washers
are supplied with the unit.