Tait TB9100, Installation And Operation Manual

Page: 61 / 144

TB9100 Installation and Operation Manual Base Station Operation 61
© Tait Electronics Limited May 2006
5 Base Station Operation
5.1 Operating Controls and LED Indicators
This section describes the hardware controls and LED indicators on the
TB9100 control panel, reciter and PMU. The hardware controls allow some
manual control of the base station, and the LEDs indicate its operational
status.
Control Panel
The operating buttons and indicator LEDs on the left side of the control
panel are used to control the TB9100 base station, as shown in
Figure 5.1 .
Figure 5.1 Operating controls on the control panel
b
speaker volume
f
power LED
c speaker button and LED g carrier button and transmit LED
d receive LED h alarm LED
e speaker i microphone channel button and LED
f
i h
g
e
d
c b