Tait TB9100, Installation And Operation Manual

Page: 48 / 144

48 Installation TB9100 Installation and Operation Manual
© Tait Electronics Limited May 2006
You can also obtain the TBA0ST2 tool kit from your nearest Tait Dealer or
Customer Service Organization. It contains the basic tools needed to install,
tune, and service the TB9100 base station.
Mounting the Subrack
Caution
We recommend that you remove the modules from
the subrack before lifting it (refer to
“Replacing
Modules” on page 75 ), or have another person help
you with the lifting.
1. Remove the front panel, as described in “Preliminary Disassembly”
on page 75 .
2. Fit the subrack into the cabinet or rack and secure it firmly with an
M6 (0.25in) screw, flat and spring washer in each of the four main
mounting holes
b
, as shown in Figure 4.4 .
Figure 4.4 Subrack mounting points
b main mounting holes - front c auxiliary mounting holes - rear
front view
rear view
b
c