Tait TB7100, Fitting Instruction, Page: 2 / 20

2 Multitone Paging Interface Fitting Instruction
© Tait Electronics Limited July 2008
Contents
1.1 Personal Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Equipment Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Tools and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.4 Parts Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.5 Disassembly and Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.6 Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1.7 Set-up Tx Channel Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.8 Set-up Programmable Audio I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.9 Set-up Programmable Digital I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.10 Program Key Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1.11 Transmit Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1.12 Set Fan Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.13 User Interface Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.14 Final System Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1.15 Final Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Associated Documentation
MAS-02731-01-xx Multitone Paging Transmitter Service Manual
All available Multitone Paging Interface/Transmitter documentation is TaitWorld Support web site.
Consult your nearest Tait Dealer or Customer Service Organisation for more information
Tuning and Configuration
Once the Multitone Paging Interface is fitted, you will need to tune the base station before
operating it. To do this you will need to use the Calibration and Program Application software to
configure your base station to suit the requirements of your radio system. Refer to the Calibration
Application and Program Application documentation for full details on these procedures. The
Calibration and Programming Software will be available from the TaitWorld Support web site.