Tait T2040II, User Manual

Page: 16 / 115

14
English
If you need to leave your T2040
II
unattended, you may
have it save incoming calls as call-back messages for
you to return later.
Setting
Queuing On To set call queuing on and have all calls except “group,
PABX and PSTN” calls queued:
• Press the Despatcher ( ) key until the indicator
beside it illuminates.
Handling Saved
Calls When you return to your radio it displays the number of
calls received and the identity of the first caller. You
may:
1 Return the displayed call by pressing the PTT key.
2 Discard the call by pressing the Clear ( ) key.
3 Scroll to another message using the Up and Down
( / ) keys and handle it as above.
4 Make a new outgoing call as normal.
Cancelling Call
Queuing You may restore the radio to normal operation by
pressing the Despatcher ( ) key again until the
indicator beside it extinguishes.
The radio will now alert you normally when a call is
received. If you still have calls saved in the queue, they
are preserved and you may recover them at any time by
turning call queuing back on.
Do Not Disturb You may set your T2040
II
to reject all incoming calls
whilst allowing you to make calls out normally. The
radio will display QUIET and callers will be given the
“unavailable” response.
• To set ‘Do Not Disturb’, dial *49#.
• To cancel, dial #49# or press the Clear ( ) key,
and the QUIET message is removed from the display.
Call Queuing