Installing a T2000
15
2. Connect the power cable’s positive (red and black) wire and
negative (black) wire to the positive and negative terminals
on the back of the T2009.
3. Plug the power cable into the power socket on the back of
the radio.
To Complete the Installation
1. If an external speaker is required, connect it as described in
the installation documentation for the speaker.
2. Make sure that the radio is switched off, as described in the
user documentation for the radio.
3. Plug the power supply into the mains supply outlet and
switch it on.
4. Make sure that the power indicator in the switch illumi-
nates. If the indicator fails to light up, check the connection
and mains power outlet. Turn to“Fault Finding Information”
on page 16 if the problem persists.
5. Connect the radio’s antenna.
6. Turn on the radio and make sure that it operates satisfacto-
rily, as described in the user documentation for the radio.