16
System Overview
T2004 Multi-Control Head
System Manual
© Tait Electronics Limited
May 2004
2.3
System Equipment
The Multi-Control Head system includes the following components:
■
one T2020 or T2040 radio with T2008 power supply unit (existing)
■
2km maximum Multidrop Line (not supplied)
■
one T2004-A20 or T2004-A40 Primary Multi-Control Head Kit
■
between one and four T2004-A21 or T2004-A41 Secondary Multi-
Control Head Kit (optional)
T2004-A20 and T2004-A40 Primary Multi-Control Head Kit Parts
The T2004-A20 or T2004-A40 Primary Multi-Control Head Kit are listed
below:
This kit provides the Primary control head as well as the Radio Interface
PCB. This PCB is housed inside a dummy (Clayton’s) control head and
replaces the standard control head on the radio. The radio can be concealed
if required, as all radio controls are now done via the Primary control head.
Qty
IPN
Description
1
X2H221 or X2H241 T2020 or T2040 Primary Control Head
a
a. For more information about the X2H221 or X2H241 Primary Control Head, see Part
B of this manual.
1
X2AM01
T2020/40 Multi-Control Head Radio Interface
b
b. For more information about the X2AM01 T2020/40 Multi-Control Head Radio Inter-
face board, see Part C of this manual.
2
219-02900-00
Micromatch to RJ45 cable
2
240-04051-00
RJ45 Screw Terminal Wallbox
2
349-00010-33
Screw, #6*3/4: S/T P/P (bracket to wall)
4
349-00010-22
Screw, 4-20x3/8 P/P Trilb-P BZ (dummy head to radio)
1
316-06433-02
Dummy (Clayton’s) control head
1
316-85125-00
T2000 Plate cover
1
219-02907-00
Power/ Speaker cable (no plug pack)
1
M2004-00-000-315 Installation manual
1
252-00010-49
Microphone clip
1
302-05211-00
Head mounting bracket
2
350-01007-00
Head thumb screws
4
360-01057-00
Screw hole covers