31
31
D-Clip and Accessory Connectors
The D-clip connector enables the radio to be installed
on the belt loop. The accessory connector enables
accessories to be installed on the radio.
Installing the Connector
1
Place the two connector pegs into the bottom holes
on the radio.
2
Push the connector into position and hold.
3
Use a coin (D-clip only) or thumb or finger to turn
the lever counter-clockwise.
4
Turn the lever until it clicks into position.
Removing the Connector
1
Press the small metal clip firmly and hold.
2
Use a coin (D-clip only) or thumb to turn the lever
clockwise 90°.
3
Remove the connector.
Summary of Contents for 5011
Page 34: ......
