Taisync ViULinx Lite, User Manual

Page: 44 / 45

41
Q15: After connecting Taisync module, telemetry can not be connected properly?
Please follow the following steps:
1) Please check whether the link state is normal, please refer to Question 13 and Question
14 if it is abnormal.
2) Please check whether the telemetry port both the air and the ground units is correct.
3) Please check whether the connecting between flight controller and air unit is correct and
that between ground unit and ground station is correct.
4) Please check whether the telemetry connection of the air and ground unit is correct. We
provides standard cables. If you make it by yourself, please check the pin.
5) Check whether the baud rate is configured correctly with Taiysnc PC management
software.
6) If the above steps can not solve the problem, please contact Taisync technical support
staff.
Q16: After connecting Taisync module, RC can not be connected properly?
Please follow the following steps:
1) Please check whether the link state is normal, please refer to Question 12 and Question
13 if it is abnormal.
2) Please check whether the RC port both the air and the ground units is correct.
3) Please check whether the RC connecting between flight controller and air unit is correct
and that between ground unit and remote contriller is correct.
4) If using PPM mode, check the mode configuration of the remote controller; if using S.
BUS mode, check the configuration of the receiver and remote controller;
5) Please check whether the RC connection of the air and ground unit is correct. We
provides standard cables. If you make it by yourself, please check the pin.
6) Please check whether the RC mode is configured correctly with Taiysnc PC management
software.
7) If the above steps can not solve the problem, please contact Taisync technical support
staff.
Q17: After connecting Taisync module, video can not be output properly?
Please follow the following steps:
1) Please check whether the link state is normal, please refer to Question 13 and Question
14 if it is abnormal.
2) Please check whether the HDMI cable and camera is normal;