7
Shandong Taishan Sports Equipment Co.,Ltd
Web : www.taishansports.cn
Introduction
Adjustment instruction
：
As shown below, firstly
，
raise the handle of the lock gear component up (see the figure
below), and then adjust the tube inside to achieve the purpose of adjusting the height. At
the same time, rotate the lock gear component and the elbow to achieve width adjustment,
to ensure that the height of the four regulating tubes and the width between the two
horizontal bars are coordinated.
Maintenance
：
1) It is necessary to check regularly whether all the connecting parts of the product are
loose or fall off, and tighten or replace them in time to ensure the safety of use
。
2) When dirty on the surface of bar, gently wipe it with a towel to dip in clean water .
3) The equipment should be checked and maintained by professionals after 1 year
4) Apply lubricating oil to 1 Inner column and 3 locking pipe per month (see the picture
below), drag the shaft and 5 stud bolts to make the handle can turn flexibly and adjust
and lock the instrument, and it is strictly prohibited to apply lubricating oil to other
parts.
Note: special liquid lubricating oil should be used. Vegetable oil can be used instead if there is
no special lubricating
