Web :www.taishansports.cn
7) As shown in the figure below, use two M16×70 inne
screws to install the rear pull rod to the extension arm, and use the rear column
connecting shaft and M12×20 inner hexagon socket head screws to connect with
the box base;
8) Use M12×45 and M12×40 hexagon socket head screws to connect the
adjusting sleeve to the extension arm and the column;
9) After tightening all the screws according to the position shown in the figure,
install the front protective sleeve on the column.
10) The installation process must be completed under the guidance of factory
personnel.
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
7) As shown in the figure below, use two M16×70 inner hexagon socket head
screws to install the rear pull rod to the extension arm, and use the rear column
connecting shaft and M12×20 inner hexagon socket head screws to connect with
8) Use M12×45 and M12×40 hexagon socket head screws to connect the
adjusting sleeve to the extension arm and the column;
9) After tightening all the screws according to the position shown in the figure,
install the front protective sleeve on the column.
10) The installation process must be completed under the guidance of factory
Shandong Taishan Sports Equipment Co.,Ltd
r hexagon socket head
screws to install the rear pull rod to the extension arm, and use the rear column
connecting shaft and M12×20 inner hexagon socket head screws to connect with
8) Use M12×45 and M12×40 hexagon socket head screws to connect the
9) After tightening all the screws according to the position shown in the figure,
10) The installation process must be completed under the guidance of factory
