5
Wiring diagram
6‐2 Wiring for DIN connector type
⚠
Caution
*Be sure to connect the protective ground wire to the fan motor.
(It may cause a breakdown, an electric leakage, or an electric shock.)
*Do not sprinkle water over the oil cooler housing.
(It may cause a breakdown, an electric leakage, an electric shock, or an early rust
formation.)
* Do not touch with a wet hand.
* Before cleaning, be sure to unplug the power cord or turn off the circuit breaker
on the distribution panel. (It may cause an electric shock or an injury.)
* Installation, operation, and maintenance must be done by a proper technician.
(It may cause an electric leakage or an injury.)
* Carry out wiring work safely and securely in accordance with the electrical
equipment standards and internal wiring rules.
(A loose connection or a wrong connection may cause an electric shock or a fire.)
DIN connector standards : IEC529(EN60529).
Protection Grade
: IP65
A terminal block is installed in the DIN connector.
Disassembly, wiring, and reassembly should be carried out by the following procedures.
(The exploded view and the connection diagram are shown on page 7)
Ｇ
Shaded Pole Coil
