use a damp cloth to rub them. Or use your fingers to remove anything that may be
stuck there. They are not suitable for dry cleaning. A little light brushing is fine.
• Don’t sit down with your tail on! With the new D-Clip, its easy to remove the tail, and
reattach. If you leave it on, and it tries to move, it can damage the insides.
Technical stuff about MiTail
MiTail requires a USB-PD capable charging adapter. PD charging is only possible via
a type-C
USB
connector. Adapters with USB-A output will not charge MiTail. The
adapter should provide at least 9V - almost all PD adapters can. If the adapters’
rated power is less than 24W, charging will take around 3 hours.
The current
firmware
(4.04)
sets the
max
charging speed.
Powerbanks behave the same as
above.
Below you can find out what the LEDs mean:
Red LED
-
O
FF
when not charging or not connected to a suitable charger. "Breathing fades" when charging,
increasing in speed as charging increases. And
SOLID ON
when charged!
Blue LED
-
Blinking
means its ready to connect.
ON
means MiTail is connected
to your phone.
IMPORTANT! TREAT YOUR USB WITH CARE!
You can break your USB socket if you dont treat it well! Please be gentle when
connecting and disconnecting the USB lead
TAKE EXTRA SPECIAL CARE WHEN CONNECTING A POWERBANK AND THEN USING YOUR TAIL
If you apply pressure to one side of the connector, you can break your tail!
Always use a 90 degree USB-C lead when using a powerbank.
How to use the D-Clip
MiTail instructions v.
9
© The Tail Company
18
/
0
6
/
2
2
The Tail Company with Crumpet the Fox logo, along with the name MiTail, are both registered worldwide
trademarks of The Mechanical Tail Company Limited and are design right registered.
