-7-
1.
Push the power cord plug into a wall outlet.
2.
Press the power switch.
When the
“
power switch
”
is pressed, the
“
power
lamp
”
is lit. At the same time, the
“
water supply lamp
”
is lit and an alarm gose off to indicate the
“
need for water supply
”
.
3.
Add water or hot water to the water tank.
Use the provided funnel and fill water or hot water until
the water level reaches the
“
optimum
”
level on the
water level indicator. (Fig. 7)
・
The water tank holds approximately 4.7 liters
of water. (About 6.7 liters for the TSK-220B, TSK-
230B, and TSK-420B)
・
The water supply lamp goes out and alarm stops
when the water level reaches the lowest level
but keep adding water until it reaches the
“
optimum
”
level.
・
Excessive water (beyond the maximum level) will be
discharged through the overflow outlet.
Caution
・
Never feed any liquid other than water or hot water.
4.
Adjust the sake warming temperature.
1) When the
“
temperature control switch
”
is
pressed once, the temperature setting mode is assumed.
Initial setting is at [OFF].
・
The setting indication and the sake warming
temperature are as specified below. However,
they can change under various conditions, and
they should be used as a guideline.
Lukewarm
Approx. 45
°
C
Hot
Approx. 65
°
C
2) Each time the
“
temperature control switch
”
is
pressed once, the temperature indicator lamp
moves up from one after another along the
diagonal line. (Fig. 8)
Instructions for Use
<Fig. 7>
<Fig. 8>
