5. Adjust the temperature control knob. The heating lamp (Orange) will light up.
(A lamp is not turned on when temperature is higher than a preset temperature.)
A heating lamp will go out if the temperature of the water in a bathtub rises to
the preset temperature. If temperature falls, the heating lamp will light up and
a heater will turn on electricity again.
6. A useful bottle cap is attached to this product. You may use it when you pour Sake
into a serving bottle from a Sake bottle.
(1) Attach a bottle cap to the mouth of the Sake bottle.
(2) Insert a bottle cap to the serving bottle and pour out Sake, fixing a bottle or
pressing down by your hand.
(3) Sake will stop if it comes to the mouth of the bottle cap.
(4) Pull out the Sake bottle from the serving bottle.
1. Turn off the temperature control knob.
2. Turn off the power switch.
3. Pull out the power plug from the outlet.
4. Take out a drain board after checking that the water in a bathtub has fully got
cold. Then, drain by the following method.
Dewatering Method
Lean the angle of the side opposite to a switch, and drain from the corner.
The numerical value of a temperature control
knob is a standard of temperature setting.
Temperature control knob
Heating lamp
(Color: Orange)
Switch Side
FRONT
BACK
Drainage Position
FRONT