Test Strip
Absorbent Hole
Apply a drop of blood here. The blood will be automatically absorbed.
Confirmation Window
This is where you confirm if enough blood has been
applied to the absorbent hole in the strip.
Test Strip Handle
Hold this part to insert the test strip into the slot
Contact Bars
Insert this end of the test strip into the meter.
Push it in firmly until it will go no further.
ATTENTION:
The front side of test of test strip should face
up when inserting test strip.
Test results might be wrong if the contact bar is
not fully inserted into the test slot.
NOTE:
The
TD-4283
meter should only be used with
TD-4283
Test Strips. Using
other test strips with this meter can produce inaccurate results.
