5
2.3 Keyboard instructions
1. Select communication protocol
After the keyboard plugged in external cable, just press
"F4" key and current selected communication protocol
will be displayed on screen.
Protocol definition:
“KN” – Kenian protocol, baud rate: 9.6 K
“Pelco-P” - P protocol, baud rate: 9.6 K
“Pelco-D” - D protocol, baud rate: 2.4 K
“HD-SC” - Shanghai security protocol,
baud rate: 9.6K
“VC” - Germany VC protocol, baud rate: 9.6K
“Pelco-P” - P protocol (continuously sending),
baud rate: 9.6K
Please do not confuse two Pelco-P protocol.
2. Select camera
a. Select any one of the cameras: press 1-16 digital
keys, then press "CAM" key. Selected camera
number will be displayed on screen.
b. Select next camera: press "+1" key;
c. Select previous camera: press "-1" key.
For example, press "2" key and then press "CAM" key,
then camera 2 is selected. Press "+1" key to select
camera 3, or press "-1" key to select camera 1.
3. Camera control
a. Select camera;
b. Press "Z+", "Z-", "F+", "F-" or use rocker to control
camera.
4. Preset camera
a. Select camera (1-16);
b. Adjust camera to preset position;
c. Press "F1" key and then press "8" key;
d. Enter preset position number (1-64);
e. Press "PRE" key.
5. Recall preset position
Preset position can be recalled in several ways:
1> Manually:
a. Select camera;
b. Enter preset position number you want to recall;
c. Press "CALL" key to recall.
2> Automatically
a. Select camera;
b. Enter maximum preset position number (2-16),
default value is 8;
c. Press "RUN" key, several preset positions of the
camera will be recalled in turn;
d. Press "DWL" key to adjust dwell time between
1-60 s;
e. Stop recalling: select camera, and then press
"HOLD" key or shake the rocker to stop recalling.
