→“Parameters Backup/Restore”
→“Machine Rename”
→“About”
In
“Master - Interp. U”
mode:
→“Work Mode”
→“Simultaneous Interpretation”
→“Floor Input Sen. Setting”
→“IR Audio In Gain Setting”
→“SI Channel Parameters Setting”
→“Floor Distribution Setting”
→“Front Panel Radiator Setting”
→“Alarm Setting”
→“Operation Language Setting”
→“Time Setting”
→“Time Display Setting”
→“Network Setting”
→“Parameters Backup/Restore”
→“Machine Rename”
→“Interpreter Unit Numbering”
→“About”
In
“Master - Central U”
mode:
→“Work Mode”
→“IR Audio In Gain Setting”
→“Front Panel Radiator Setting”
→“Floor Distribution Setting”
→“Fiber Port Setting”
→“Operation Language Setting”
→“Network Setting”
→“Parameters Backup/Restore”
→“Machine Rename”
→“About”
In
“Master - Dante”
mode:
→“Work Mode”
→“Number Of Channel(s) Setting”
→“Channel Name Setting”
→“Channel Gain Setting”
→“Auxiliary Input Setting”
→“Front Panel Radiator Setting”
→“Alarm Setting”
→“Operation Language Setting”
→“Network Setting”
→“Use Testing Audio Signal”
→“Parameters Backup/Restore”
→“Machine Rename”
→“About”
→“About Dante”
In
“Bypass”
mode:
→“Work Mode”
→“Operation Language Setting”
→“Network Setting”
→“Machine Rename”
→“About”
Press the “MENU” button to go to the
corresponding submenus.
To switch from term to term use the “
/
” button.
To exit the current menu and to return to the upper
level menu use the “EXIT” button.
2.6.1 Work Mode
a)
Use the “
/
” button to switch between “Master”
and “Bypass”;
“Master”, use the “MENU” button to confirm and go
to step b);
“Bypass”, use the “MENU” button to confirm and
go to step c);
b) Use the “
/
” button to select the master mode
interface;
“Analog”, SI audio signal input from AUDIO IN
interfaces of transmitter;
“Interp. U”, SI audio signal input from Interpreter
unit(s) connected to the transmitter;
“Central U”, SI audio signal input from main unit(s)
connected to the transmitter
;
“Dante”, SI audio signal input from Dante network
connected to the transmitter
;
21