12
3. Camera Video Out Mode
3.1 Switch Configuration
Before using the camera, configure the DVI interface output color format,
etc. Switch 2, to configure these settings is located on the back panel of
the camera. The below figure shows switch 2 on the back panel, the ON
direction is marked beside the switches.
¾
SW2 Pos 3
Pos 3
Setting
OFF
DVI-I output color format is YUV.
This mode is used for DVI-YPbPr and DVI-HDMI interface.
ON
DVI-I output color format is RGB.
This mode is used for DVI - DVI-D, DVI - VGA and
DVI - 5-BNC (RGBHV) interface.
¾
SW2 Pos 4
Pos 4
Setting
OFF
Doom speed is related with current optical zoom position. The
more to the telephoto end, the slower (and more accurate) it
goes.
ON
Doom speed is not related with current optical zoom position.