3. Lift the upper bench frames to their places. The upper bench is fitted to the metal pins on the feet by its lower
edges. We always leave a small installation allowance for the benches, which is usually 15 – 20 mm. Install one
removable spacer to the lower bench. This helps you achieve the right gap to the front of the bench as well.
Centre the bench, and attach the upper bench frames to the walls (90 mm screws, included in the delivery!),
straight through the frame, screwed to the same bar that the panel is attached to. If it looks like there is going to
be a large gap behind the structure, stuff the gaps next to/on top of the screw with plywood patches, which are
included in the delivery. The nailing board can usually be located by checking where the panel has been nailed
to the wall. If no nails are visible, use your hand to try where the trim is located beneath the panel. Use the spirit
level to help you install the benches straight. When the frame has been fastened to the wall, screw the bench
skirts properly in position, and lift the tops of the upper bench to their position. The bench tops are not fastened
to the frames. Also check the straightness depth-wise.
4. Place the backrests in position. The installation height is usually 400 mm – 450 mm, depending on the model
and the material. This height can be raised or lowered according to your own preference. Also consider the
windows! Use the window to check the installation height, if the window is positioned low in the sauna! Check
the straightness with a spirit level. (Screws 55 mm long, included in the delivery!)
