5
__________________________________________________________________________________________________________________
TAGLab
Battery Tester |
BAT 100
Safety
General Safety Guidelines
•
Read all safety guidelines and instructions. Non-compliance with safety guidelines and instructions can
cause electric shock, fire and / or serious injury. Keep all safety guidelines and instructions for future
reference.
Precaution
•
Always perform testing in a well-ventilated area.
•
Never operate the device if the cable is damaged. It must be repaired or replaced by a qualified technician.
•
Make sure that the acid of the battery does not come into contact with the skin or clothing as it may cause
burns. However, if this happens then rinse the affected area immediately with water and contact your
physician immediately. Never trip the battery as acid may leak. Always wear safety goggles and protective
gloves.
•
Do not place the battery on top of the tester or vice versa. Do not place other equipment on top of the tester.
•
Do not pour liquid on the tester as there is a risk of electrocution. Never cover the tester when the device is
in operation. Make sure there is no risk of explosive or flammable substances e.g. gasoline or solvent, being
ignited whilst using the tester.
•
Do not expose to heat or an excessive source of light. Keep the tester away from naked flames, hot surfaces
and sparks. Do not smoke or have open flames near the battery.
•
Never disassemble the tester or attempt to repair the device. For inspection and repair, take it to a qualified
technician. Remove all device cables from the battery before attempting to drive your vehicle.
•
Do not drop the Battery Tester as it may affect proper operation.
Warning
Life-threatening danger to infants and children! Never leave children unsupervised with the packing material as this
can cause suffocation. Do not allow children to play with cables – strangulation hazard.
The manufacturer is not responsible for damages caused by:
•
Improper connection and / or operation. Any type of modification to the device.
•
Exterior force, damage to the device and / or damage to parts of the device caused by mechanical impact or
overload. Moisture and / or insufficient ventilation.
•
Use of the device for purposes that are not described in this instruction manual.
•
Consequential damages caused by non-intended and / or improper use, and / or defective batteries.
•
The unauthorised opening of the device.
•
This will void the Warranty.