5
ASSEMBLING | ZAP STAND OR ZAP STAND UPGRADE KIT (2/3)
Secure the cable bundle with the two P clips (bag 3). If you’re using
a US model, make sure to unmount lens protection cap when using
this microscope.
Place the extended camera arm with mounted camera in the
camera mount and tighten the front and side finger screws (bag
3).
OPTION 2: WITH CAMERA DIRECTLY IN CAMERA HOLDER
Unscrew the lens with your hands and remove the lens ring by
unscrewing the three M3x6 screws.
Screw the camera adapter ring on the camera with the three
countersunk M3x10 screws (bag 4). For correct assembly, the
laser label on the adapter ring must be placed next to the laser
itself.
Then, rescrew the lens on the camera.
