5
V O L U ME
B A S S
T R E B L E
L IMIT E R
P O W E R
O F F
O N
1
2
3
4
5
6
7
8
9
Front and Rear Panel
1. Volume Regulator
2. Bass Regulator
3. Treble Regulator
4. Power Indicator Led
5. Limiter Switch
6. Balanced Stereo Audio Source Input (pin screw terminal connectors)
7. Unbalanced Stereo Audio Input (3.5mm)
8. Speaker Output (pin screw terminal connectors)
9. DC Adapter Input
Hooking Up Cables to Terminals
The Speaker and Balanced pin screw terminal connectors can accommodate up
to 14 AWG cables. 14 AWG cable is recommended for longer connections (greater
than 20 meters / 66 feet). For shorter lengths you can use 16 or 18 AWG cables. It
is recommended to leave about 150 cm (5 feet) of extra cable at the amplifier end to
facilitate positioning and installation of the amplifier. Do not use staples, nails or other
metal objects to secure the cables. You will get the best sound quality and least amount
of hum by keeping the cables away from other electrical wires and cables.
Pay attention to connecting the polarity of the amplifier correctly with the balanced
audio source and speakers (speakers should be connected RED + with + amplifier
terminal, BLACK - with – amplifier terminal). Before connecting make sure that your
amplifier is switched off. Please refer to your speaker instruction manual for more
information.
NOTE!
This amplifier accepts only speakers with impedance of 8 Ohms. Connecting
speakers outside this range can damage this amplifier or speakers. This may void your
warranty.
