8
Operation
CHARGING - IMPORTANT SAFETY REMARKS!
In order not to void your warranty and to avoid damaging this filter
and / or connected audio-video equipment and devices, strictly follow
the below remarks:
• The USB-A Charging Ports are only intended for charging devices
which are compatible with the USB-A Charging Ports technical data
printed on the filter:
Output: DC – direct current and voltage provided in Volts.
Max total load: – maximum total load when all USB-A Charging Ports
are used simultaneously.
[Maximum load for a single USB-A Charging Port = the Max total
load divided by a number of devices being charged].
The total load generated by all devices connected to the charger must
not exceed the Maximum total load.
• The number of devices which may be charged simultaneously is limi-
ted to a number of USB-A Charging Ports this filter is equipped with.
Never connect more than 1 device to a single USB-A Charging Port.
• When charging use only a recommended USB cable for your device
and replace faulty cables immediately.
• When you want to turn off the power filter we recommend to turn off
your audio-video equipment firstly.
• This power filter is not a uninterruptible power supply unit (UPS).
It will not operate when the input power source fails (no power
or too low voltage).
4. Turn on your audio-video equipment and enjoy your system.
5. Reset
– the Power Output Sockets will be powered off when the maximum power
load is exceeded (check on the rear panel or in specifications).
Press the RESET button to restore the power supply.
