Note!
- Operation and user interface may vary depending on the mobile device model, its
operating system and application version.
- Your mobile device may ask for granting permission for the Control Application to
access to different mobile device resources.
Make sure to select the correct choices to avoid problems with the configuration.
- If you change the network password for the local network device (router etc.) then
you must reset the current connection (short press once the Reset Button) and
configure it one more time.
- Make sure the Wireless Antenna is securely and firmly installed, and that there are
no objects placed between your local network device and the Streaming Adapter
obscuring the wireless signal which may result in unstable or no connection.
- Make sure that the Internet transfer speed is sufficient - too slow transfer may cause
interruptions in playback of some content.
2.The device setup screen will be displayed with information about the status of the Input
Indicator - make sure it is flashing in white (if it is not then reset your Wireless (wi-fi)
connection - check “Operation” for more details), tap on
indicator is blinking
.
Note!
Occasionally, it may be required to reset your Wireless (wi-fi) connection again and
repeat the search.
3. The Control Application will list out all devices available for setup - select the Streaming
Adapter you want to configure and tap on
Setup this device
.
4. Continue with the steps provided in “Wi-fi connection configuration” starting from
point 4.
Connection Options
16
