Taga Harmony TOS Platinum, Instruction Manual

Page: 9 / 12

9
• TOW models:
- Screw a hook in the wall where you want to mount the speaker.
WARNING!
Depending on the mounting surface use appropriate screws or wall anchors (ask your local dealer
or installer for advice).
- Connect the speaker cable to the speaker terminals.
- Hang the speaker on the hook.
Note! Screws, hooks and wall anchors may not be included with your speakers.
TOS using U mounting bracket with horizontal and vertical regulation:
- Using 4 screws install the wall mount (A) on the wall or ceiling where you want to mount the
speaker (Fig. 1).
WARNING! Depending on the mounting surface use appropriate screws or wall anchors (ask your
local dealer or installer for advice).
- Attach the U bracket (C) to the wall mount (A), slide in the locking cover (B) and secure it with 4
screws (Fig. 2).
- Remove the speaker terminal box cover, connect the speaker cable to the speaker terminals
and firmly place the cover back. (Fig. 3)
- Slide the speaker into the U bracket and screw top and bottom bracket knobs to the speaker to
secure the speaker in the bracket. (Fig. 4)
- Adjust the horizontal position of the speaker and fasten (screw in firmly) the knobs. In the future
the knobs can be loosen to adjust the speaker horizontal position (Fig. 5).
- Adjust the vertical position of the speaker and secure the chosen position by installing 2 screws
on the side of the wall mount (A). In the future the side screws can be removed to adjust the spe-
aker vertical position (Fig. 5).
Speaker Mounting
1
2
3
4
5