9
Hooking Up the Amplifier
1. Make sure the amplifier is turned off (the Power Switch
and the Power
Cable is removed from the wall outlet).
2. Turn the Volume Regulator to MIN (max counter clockwise).
3. Using speaker cables (not supplied with this product) connect your speakers
to the SPEAKERS OUT (A or B, A and B) connectors located on the rear panel.
Check "Hooking Up Speaker Cables" for more details.
4. If you want to play music from analog audio source devices (CD player, satellite
or FM tuner, video console etc.): using RCA interconnect cables (not supplied with
this product) connect them to the analog inputs on the rear panel (CD, AUX1, AUX2).
5. If you want to play music from an analog audio source device (smartphone,
computer etc.): using a 3.5 mm (1/8") mini jack interconnect cable (not supplied with
this product) connect it to the analog 3.5 mm (1/8") input on the front panel (MP3).
6. If you want to use a microphone: using a 6.35 mm (1/4") jack interconnect cable (not
supplied with this product) connect it to the Microphone 6.35 mm (1/4") input on the
front panel (MIC).
7. Your amplifier is ready for operation.
Depending on the speaker configuration (A or B, A + B) only speakers
within the below range of impedance may be connected to this amplifier.
Connecting speakers outside this range may damage this amplifier and/
or speakers. This may void your warranty.
A or B : use only 4 - 8Ω impedance speakers
A + B : use only 8 - 16Ω impedance speakers
