background image

13

Operation

Distortion and sound quality worsening may occur when the knob is in 

the maximum position. It may damage the amplifier and / or speakers. 

This may void your warranty.

Using at high volume levels may damage this amplifier and / or 

speakers. This may void your warranty.

VOLUME Regulator:

Using the Volume Regulator on the front panel or down ▼

 

and up ▲ buttons on the 

remote controller, you can adjust the sound volume from minimum (the knob – max 

counterclockwise) to maximum (the knob – max clockwise).

MUTE:

During playback press this button to stop amplifier audio output (no sound will be 

audible in speakers, headphones nor through the PRE OUT).

Press the Mute or volume regulation buttons on the remote controller to recover  

the audio signal output back.

LOUDNESS:

The LOUDNESS function boosts low and high frequencies - it is intended only to 

be used at low listening levels. 

The function is controlled by the LOUD button. 

LOUDNESS ON – the Loudness Function Led Indicator is illuminated. 

LOUDNESS OFF – the Loudness Function Led Indicator is switched off.

1.  Plug the Power Cable to the amplifier and into the electrical outlet.

2.  Turn on the amplifier – press the Power Switch (the Power Switch 

 ).  

The status LED located on the Volume Regulator should turn red in a few seconds. 

If it does not, it means that the amplifier is working under in abnormal condition 

(a protection mode) – turn off the power, unplug the Power Cable and check 

whether some of the cables are not short circuited. 

After fixing the cables turn the amplifier on.

3.  By pressing the Input Selector button on the front panel or one of input selector 

buttons on the remote controller, select which audio source you want to play.  

Make sure the audio source is properly connected to the rear panel inputs - for the 

Bluetooth

®

 source check “

Bluetooth

®

 Connection”. 

The selected source is indicated by one of LED indicators on the front panel.

4.  Turn on your audio source and start playback.

5.  Regulate volume on the amplifier to adjust the level of sound.

Note!

 Check “Additional Information” for other useful operating instructions.

High volume levels may damage this amplifier and / or speakers.  

This may void your warranty.

Summary of Contents for HTA-800B





















Reviews: