12
Operation
Headphones connection:
When headphones (not supplied with this product) are plugged to the headphone input
(Headphones) the transmission of sound to the speakers and PRE OUT is switched off.
The speakers and PRE OUT are again active after you disconnect the headphones.
The volume of the headphones is regulated by the Volume Regulator (front panel and
remote controller).
All sound regulations (Loudness / Bass / Treble) will affect the sound transmitted to the
headphones.
Volume Regulator (front panel and remote controller):
Using the Volume Regulator on the front panel or down ▼
and up ▲ buttons on the
remote controller, you can adjust the sound volume from minimum (the knob – max
counterclockwise) to maximum (the knob – max clockwise).
MUTE (remote controller):
During playback press this button to stop amplifier audio output (no sound will be
audible in speakers, headphones nor through the PRE OUT).
Press the Mute or volume regulation buttons on the remote controller to recover the
audio signal output back.
LOUDNESS (front panel):
Press the LOUD loudness compensation button down (
) to increase the level of
the high and low frequencies – it is intended to be used at low listening levels.
Press the button again (
) to get back to regular amplifier settings.
The DIRECT button will not affect the operation of the LOUD button.
DIRECT (front panel):
Press the DIRECT button down (
) to enjoy the purest sound without any
adjustments (BASS and TREBLE regulators will be disabled).
Press the button again (
) to allow sound adjustments by the BASS and
TREBLE regulators. The DIRECT button will not affect the operation of LOUDNESS.
Listening at high volume can cause hearing damage.
Distortion and sound quality worsening may occur when the knob is in
the maximum position. It may damage the amplifier or speakers.
This may void your warranty.
Using at high volume levels can damage this amplifier and/or
speakers. This may void your warranty.
Using the DIRECT OFF and BASS / TREBLE regulators at high volume
levels can damage this amplifier and/or speakers.
This may void your warranty.