Rear Panel:
12. Analog Stereo RCA Inputs CD / LINE
13. Preamplifier Stereo RCA Output
14. Digital Input OPTICAL
15. USB Port*
16.
Bluetooth
®
Antenna and Antenna Socket
17. Speaker Right Channel Output (Speaker Connectors)
18. Speaker Left Channel Output (Speaker Connectors)
19. Power Cable Input and Fuse Box
*(only HTA-700B v.3 USB model)
Hooking Up Speaker Cables
Front and Rear Panel
/HTA-700B v.3 USB model shown/
A blown fuse should be only exchanged for exactly the same type
as indicated on the rear panel.
The Power Cable should be disconnected!
Before connecting make sure that your amplifier is turned off.
Do not let bare speaker wires touch each other or any metal part
of this unit it may damage this amplifier and/or speakers.
This may void your warranty.
The Speaker Connectors can accommodate up to 10AWG speaker cables as well
as most of popular plugs (banana etc.). It is recommended to leave about 150 cm
(5 feet) of extra cable at the amplifier end to facilitate positioning and installation of the
amplifier. Do not use staples, nails or other metal objects to secure the cables.
You will get the best sound quality and least amount of hum by keeping the cables
away from other electrical wires and cables.
Pay attention to connecting the polarity of the amplifier correctly with the speakers
in each speaker group (speakers should be connected RED + with RED + amplifier
connector, BLACK – with BLACK – amplifier connector).
8
