6
Remote Controller
1. Open the cover by unscrewing 6 screws on the bottom side of the remote
controller and remove the rear cover.
2. Insert two AAA batteries into the battery compartment. Carefully follow the polarity
diagram inside the battery compartment (po and negative - symbols).
3. Replace the cover.
Note!
•
Always use AAA batteries and do not use the rechargeable batteries.
•
Do not mix new batteries with old batteries or different kinds of batteries.
•
If the batteries run out, remove the old batteries and replace them with new ones
within several minutes.
•
If the batteries are placed incorrectly, they can cause explosion.
•
Remove the batteries if the remote control is not used for a long period of time.
•
Do not handle and store the batteries together with metallic tools.
Use the remote control within a range of 5 meters from the amplifier and angles of up
to 30 degrees aiming at the remote control sensor.
Note!
Exposing the remote control sensor to direct sunlight or strong light may cause
faulty operation.
Battery Installation
Operating Range
