9
Hooking Up Speaker Cables
2
4
3
+
-
L
1
1. Tighten the speaker connector.
2. Insert the banana plug into the end of the corresponding connector.
1
2
Banana plug
Connecting speaker cables
Speaker cables have 2 conductors. Each conductors should be connected to a
separate speaker connector - mind the polarity while connecting.
For each conductor:
1. Remove approximately 10 mm (3/8”) of insulation from the end of the conductor.
Twist the bare wires firmly together.
2. Loosen the speaker connector.
3. Insert the bare wires of the conductor into the gap of the speaker connector.
4. Tighten the speaker connector.
Connecting via banana plug
Mind the polarity while connecting.
Note!
An insert hole for the banana plug in some speaker connectors maybe secured
with a plastic plug - make sure to remove this plastic plug before inserting the banana
plug.
