6
Speaker Mounting
TBS SPEAKERS [100V CONNECTION]
The speaker has 4 power options (check specifications on the www.tagaharmony.com website).
The speaker is equipped with 5 input wires coded with colors: BLACK is common and other 4
colors are used for different transformer output power taps: BLUE is 30W, RED is 20W, YELLOW
is 10W, GREEN is 5W.
BLACK
wire: connect it to the common output of your speaker line / amplifier (usually marked as
COM).
BLUE
or
RED
or
YELLOW
or
GREEN
wire: select the one according to the application and the
power you require. Connect the selected one to the 100V power output of your speaker line /
amplifier (usually marked as 100V). Never connect more than a single wire simultaneously.
The input wires are short and should be extended with speaker wire – all connections should be
firmly made and isolated.
WARNING!
Make sure to use a 100V speaker line / amplifier - otherwise you may damage the
speaker and/or amplifier and void your warranty.
TOS SPEAKERS (100V and LOW-IMPEDANCE connection)
The speaker can be connected to 100V speaker line / amplifier [100V mode] or an amplifier
suitable to work with low-impedance speakers [low-impedance mode].
The speaker is equipped with a selector (usually on the rear panel) for choosing the working mode
(100V or low-impedance) and 2 wire terminals coded with colors (BLACK and RED).
Each wire terminal can accommodate a speaker wire up to 10 AWG - for selected models different
types of plugs and connectors can be used.
100V mode – connection (check the diagram on page 5)
The 100V mode selection usually has different selectable power options (check specifications on
the www.tagaharmony.com website).
Depending on your application and speaker line / amplifier power set the suitable power on the
selector.
Wire terminals: BLACK is common, and RED is transformer output power tap.
BLACK
terminal: connect it to the common output of your speaker line / amplifier (usually marked
as COM).
RED
terminal: connect it to the 100V power output of your speaker line / amplifier (usually marked
as 100V).
WARNING!
Make sure to use a 100V speaker line / amplifier for this mode - otherwise you may
damage the speaker and/or amplifier and void your warranty.
Low-impedance mode – connection
The low-impedance mode selection is marked with
Ω
sign (usually 8Ω or 6Ω or 4Ω). Choose this
mode if you intend to use an amplifier suitable to work with low-impedance speakers.
Pay attention to connecting the polarity of the speaker wire terminals correctly with the amplifier
speakers output terminals (RED + with RED +, BLACK - with BLACK -).
