background image

SAFETY INFORMATIONS

Before using the equipment, carefully read all the safety labels and warnings related to the equipment

as well as all the instructions contained in this Guide or the Equipment Installation Guide and retain them in a
safe place for future reference. It is the owner's responsibility to ensure that all users of the equipment are
adequately informed about the safety precautions and use. The misuse of this equipment could result in health
hazards. The manufacturer assumes no responsibility for personal injury or property damage incurred by the
improper use of this equipment.

PRODUCT
Two or more people will be required to assemble this equipment. Make sure that the floor is flat and

there is sufficient space to mount, dismount, and use the equipment. Remove the equipment from the packaging.
Do not discard the packaging until the installation is complete. Proceed with the assembly and make sure that
the equipment is firmly installed and that all parts are tightened correctly. The equipment must be retained in
the original configurations of the project. Do not carry out any modification that alters the equipment, which
could result in the loss of the product warranty.

Replace damaged parts with original parts and regularly carry out preventive maintenance;
Replace defective parts immediately and/or take the equipment out of use until it is repaired;
Replace damaged labels;
For equipment with a weight stack, never use a system of weights if the top adapter plate is attached in

a higher position relative to the others;

Adjust the required force so that exercises are smooth and uniform;
Inspect the equipment before use, especially cables, pulleys, fittings, canvas, attachment of the

seat/saddle, pedal and shoe, moving or adjustable parts when applicable. Make sure that all the pieces and parts
are securely fastened;

Never release the anklet, handles or bar while the weights are raised: the weights will fall with a lot of

force and this can damage the equipment;

The training equipment shall only be used in areas where access and control is specifically regulated by

the owner.

The training equipment shall only be used in supervised area.

PERSONAL
Consult your doctor before starting and during any exercise program. Special attention should be given

to children, pregnant women, the elderly, people with heart problems and those with a disability or pre-existing
health problems.

Keep children and pets, away from the equipment especially during use. Children should be watched so

they do not to play with the equipment, whether or not it is in use.

The equipment is not intended to be used by children or people with some reduction in their physical,

sensory or mental capacity, lack of experience and knowledge, unless they have been given the necessary
instructions for the use of the equipment and be under the care of a person who is responsible for their safety.

When the machine is in motion never put your hands on the column weights covers (if applicable) or

any moving parts. Do not insert any object in the openings. Never carry out any adjustments, cleaning or
maintenance when the equipment is in motion.

Keep your body, clothes and hair away from any moving parts so that you do not suffer an accident or

serious injury.

Do not allow more than one person use the equipment at the same time, except in those stations that

are designed for this purpose.

Use the settings provided by the equipment and place yourself in a comfortable and adequate position

on the equipment.

Stop any exercise if you feel any dizziness, chills, shortness of breath, tachycardia, headache or chest

pain, weakness or breathing difficulty.

Wear appropriate athletic attire. Do not wear loose clothing that could eventually become caught in

the equipment. Always wear athletic shoes for exercising.

Do not perform any exercises 1 hour before or 2 hours after meals. Hydrate yourself during the

exercises.

Before you start the exercise it is recommended that you warm up for 5-10 minutes, doing rhythmic

exercises that will move every muscle so you not damage the muscle during the exercises. Stretch before and
after your session. Inhale and exhale while exercising to relax and coordinate breathing with the movement.
Once a muscle has been exercised rest it for 48 hours before exercising it again. The exercises are efficient and
you can get the most out of the equipment if you are supervised by a professional.

The person exercising should face the equipment at all times during the exercise. The weight stacks

should remain within the field of vision of the user throughout exercise to prevent danger to the third party.

Note: For your convenience and quick access, basic safety information, also available in sticker fixed on

tower

Summary of Contents for S-Line 759













Reviews: